Tips for Shooting in Low Light Conditions

INIPASTI.COM – Dim conditions due to limited light sources in a moment are a challenge when shooting.

A photographer must rely on several ways to keep shots in low light impressive.

Reported on CNN., Here are tips that can be done to produce the expected image when facing low light.

Increase ISO; The higher the ISO number, the more sensitive the camera sensor is to the light that reaches it.

Additional noise generated using a high ISO can be slightly filtered out in post-processing.

Shooting in RAW format allows the most flexibility in post-processing.

The larger the aperture, the more light will enter the lens. Shooting at f / 5.6 lets more light in than shooting at f / 18. Keep in mind that the lower the number, the larger the aperture.

Slow down the shutter speed; Launching Picture Correct, the more light is captured, the longer the shutter remains open. Remember that a good rule of thumb for clear shots is not to be slower than 1/60 second.

Use a tripod when shooting at something slower than that, although there is a chance of success on slower shots using a lens with image stabilization.

Reduce camera shake
Launching Poster Jack, when in a slow shutter speed it is very important to eliminate camera shake in order to get sharp photos in low light situations.

You can do that by using a tripod and setting the camera timer. You can also eliminate camera shake by using the camera’s built-in stabilization feature.

Use Other Light Sources;
To get the sharpest possible image without using a flash, try to incorporate as much light as possible.

If the subject is not stationary, position it near the light source or, if possible, move the light towards the subject.

However, do not position light behind the subject if it is the only source of light, unless the goal is to create a silhouette.

Adjust White Balance; Shooting in low light can cause photos to appear faded, or lack detail and color.

By adjusting the white balance of a digital camera, the camera can capture the most accurate colors possible.

To prevent the image from having yellow, orange, or blue shadows, adjust the white balance for the type of light used (Syakhruddin)

(Visited 1 times, 1 visits today)

Leave a Comment

This site uses Akismet to reduce spam. Learn how your comment data is processed.