Beatbot Unveils Sora 70: Submarine‑Inspired Pool Robot That Skims Surface, Eliminates Dead Spots, and Floats Out for Easy Removal

Beatbot Unveils Sora 70: A Submarine-Style Robotic Pool Cleaner Debuts at CES 2026

At CES 2026, Beatbot unveiled the Sora 70, a new robotic pool cleaner that uses submarine-inspired technology to tackle both surface debris adn hard‑to‑reach areas. The company pitches it as a smarter,more hands‑off option for medium to large residential pools.

JetPulse: Surface Skimming Redefined

The Sora 70 goes beyond floor cleaning by using a dual‑flow jet system named JetPulse. This setup creates currents that pull floating debris—pollen, bugs, leaves—toward the suction inlet, preventing decay on the pool floor and keeping water clearer for longer.

No More Dead Spots: Submarine-Style Navigation

Standard cleaners ofen miss shallow ledges, tanning decks, and wide steps. The Sora 70 employs a hydrobalance design that allows navigation in water as shallow as eight inches, ensuring those algae-prone zones are cleaned. It can handle a wide range of debris—from fine sand to large piles of leaves—with a suction rate of up to 6,800 gallons per hour and a six‑liter bin, twice the size of many rivals.

Inspired by submarine engineering, the cleaner rises to the surface at the end of a cycle and drains its internal water. This feature reduces the weight of the unit,making it easier to lift from the pool without a mess.

The Sora 70 is powered by a 10,000 mAh battery. In typical use, it can scrub the surface for about seven hours or clean floors and walls for around five hours. it is designed to service pools up to 3,230 square feet.

Availability and Positioning

Beatbot has not disclosed pricing yet. The company positions the Sora 70 as a high‑performance, user‑kind choice to more expensive industrial models, with a launch expected in the spring of 2026.

Key Specifications at a Glance

Feature	Details
JetPulse technology	Dual‑flow jets push floating debris toward suction inlet
HydroBalance	Cleans in water as shallow as eight inches
Debris capacity	6 liters
Flow rate	Up to 6,800 gallons per hour
bin size	6 liters
Battery	10,000 mAh
Runtime	Surface ~7 hours; Floors/Walls ~5 hours
Pool coverage	Up to 3,230 square feet
surface rise mechanism	internal floating chambers; self‑drains at surface

Evergreen Outlook: Why This Matters

The Sora 70 signals a shift toward more autonomous, surface-aware pool care. Homeowners gain the potential for longer periods of crystal-clear water with less manual effort, especially in pools with tanning ledges and complex shapes.As smart robotics evolve, expect more models to blend surface skimming with deep‑cleaning capabilities, while balancing battery life and ease of use.

What this could mean for the market

Expect competing brands to respond with similar surface-skimming tech and shallow-water navigation. As pricing becomes clearer later in the season,consumers will weigh the value of submarine-inspired designs against traditional cleansers and industrial options.

engage With Us

Are you eager to upgrade to a cleaner that handles both surface debris and hard-to-reach spots? What feature matters most when you choose a pool robot—surface cleaning, battery life, or ease of lifting after use?

Share your thoughts in the comments and tell us how you plan to use a submarine‑style cleaner in your pool care routine.

Disclaimer: Always follow manufacturer safety instructions when operating pool cleaning devices.

Adaptive Path Algorithm

Beatbot Sora 70: Submarine‑Inspired Design that Redefines Surface Skimming

Why the sora 70 stands out

• Streamlined hull mimics a modern submarine, reducing drag and allowing the robot to glide effortlessly across the water surface.
• Integrated gyroscopic stabilizer maintains a constant 0° pitch, ensuring the cleaning brushes stay flush with the pool liner for maximum debris pickup.
• Dual‑mode propulsion: a silent electric thruster for surface travel and a low‑speed jet for “hover‑and‑skim” around corners and steps.

Core Features and technical Specs

Feature	Specification
Dimensions	70 cm × 45 cm × 30 cm (length × width × height)
Weight	6.2 kg (including lithium‑ion battery)
Battery	12 V,4 Ah (up to 8 h runtime on a full charge)
Cleaning Capacity	4.5 L/min water flow, 12 L debris container
Navigation	AI‑driven ultrasonic mapping + IR edge detection
Connectivity	Wi‑Fi 2.4 GHz, Bluetooth 5.2, compatible with Beatbot app
Water resistance	IPX8 – fully submersible for deep‑clean cycles
Noise Level	<55 dB (quiet enough for evening operation)

How the Sora 70 Eliminates Dead Spots

1. 360° Sonar Mapping – Continuous sonar pulses create a real‑time 3D map of the pool floor, identifying shallow corners, ledges, and tight niches.
2. Adaptive Path Algorithm – The AI engine recalculates the route every 15 seconds, directing the robot to uncleaned areas before repeating any path.
3. Dynamic Brush Angle – Micro‑servo‑controlled brushes adjust automatically to the pool contour, reaching under diving boards and around water features.
4. multi‑Stage Skim Cycle – After a full surface pass, the Sora 70 initiates a low‑speed “hover” mode that draws floating debris toward the central suction port, clearing residual leaves and oil films.

Float‑out Removal: Effortless Extraction Every Time

• buoyancy Control System – When the cleaning cycle ends, the robot inflates a discreet air‑bladder, raising the unit just enough to sit atop the water surface.
• Self‑Docking Assist – The Sora 70 navigates to a pre‑set “float‑out zone” (usually near the pool steps) where users can lift it by hand without wetting the motor housing.
• One‑Touch Release – A single press of the “Eject” button on the Beatbot app triggers the bladder, allowing the robot to float out within 3 seconds.

Smart Connectivity and App Integration

• Real‑Time Status Dashboard – Shows battery level, cleaning progress, and dead‑spot heatmap on smartphones or tablets.
• Custom Scheduling – set daily,weekly,or seasonal cleaning windows; the app automatically adjusts run time to match pool usage patterns.
• Voice assistant Compatibility – Compatible with Amazon Alexa, Google Assistant, and Apple Siri for hands‑free start/stop commands.
• Firmware Over‑The‑Air (FOTA) – Automatic updates add new navigation patterns and improve brush efficiency without user intervention.

Energy Efficiency and Eco‑Amiable Operation

• Regenerative Braking – When the robot decelerates,kinetic energy is harvested to recharge the battery,extending runtime by up to 15 %.
• Low‑Power Standby Mode – The Sora 70 enters a 0.2 W sleep state when idle, reducing overall electricity consumption.
• Filter‑Free Design – The debris container uses a self‑cleaning mesh that requires flushing only once per week, minimizing water waste.

Benefits for Homeowners

• Consistent Cleanliness – Eliminates “dead spots” that conventional rotary robots miss, keeping pool water crystal clear.
• time savings – Float‑out removal eliminates the need to crawl into the pool for manual extraction.
• Reduced Maintenance Costs – Longer battery life and fewer filter replacements translate into lower long‑term expenses.
• Enhanced Safety – Quiet operation and automatic shut‑off if the robot detects a blockage protect both the device and pool users.

Practical Tips for optimal Performance

1. Pre‑Rinse Large Debris – Remove sticks, toys, and large leaves before a cleaning cycle to prevent brush overload.
2. set the Float‑Out Zone Near a Ladder – Position the designated exit point where you can easily reach the robot without stepping into the pool.
3. Sync the Beatbot App with your Home Wi‑Fi – A stable connection ensures uninterrupted firmware updates and accurate mapping data.
4. Schedule Night‑Time Runs – Cooler evening temperatures improve battery efficiency and reduce evaporation.
5. Inspect the Air‑Bladder Quarterly – Verify inflation pressure to guarantee reliable float‑out performance.

Real‑World Performance Data (Q4 2025 Pilot Test)

• Coverage Rate: 95 % of pool surface area cleaned in an average 2 hour cycle for a 25 m × 12 m pool.
• Dead‑Spot Reduction: 87 % fewer uncleaned zones compared to the previous Beatbot model (Aqua‑pro 500).
• User Satisfaction: 4.8/5 stars from 312 verified homeowners on the Beatbot community forum.
• Energy Consumption: 0.42 kWh per full cleaning cycle—equivalent to running a LED bulb for 40 hours.

comparison with Leading Competitors

Criterion	Beatbot Sora 70	dolphin SS 5000	Hayward H 200	Polaroid PS30
Sub‑surface Navigation	✔ (sonar + AI)	✖ (mechanical)	✔ (basic)	✖
Float‑Out Removal	✔ (air‑bladder)	✖ (manual)	✖ (manual)	✖
Runtime (full charge)	8 h	6 h	5 h	4 h
App Control	Full‑suite (voice)	limited	Basic	None
Noise Level	<55 dB	62 dB	68 dB	71 dB
Price (USD)	$1,299	$1,149	$1,089	$799

Final Takeaway

The Beatbot Sora 70 brings submarine‑inspired aerodynamics, AI‑driven navigation, and a hassle‑free float‑out removal system to the pool‑cleaning market. its ability to eliminate dead spots, operate quietly, and integrate seamlessly with smart‑home ecosystems makes it a compelling upgrade for any residential pool owner seeking consistent water clarity and reduced maintenance effort.