G923 Controller Issue: Brake Registers When Pressing Gas Pedal in r/Simracing – How to Fix?

August 24, 2025

Electrical Faults: When To Repair, When To Call A Professional

A recent case highlighted the delicate nature of electrical repairs, specifically involving faulty gas components. The issue arose from a short circuit within the gas system,demanding immediate attention to prevent potential hazards. A homeowner successfully addressed the problem by carefully inspecting and resoldering connections.

The Perils of Short Circuits in Gas Systems

Electrical short circuits can occur in gas systems due to corrosion, physical damage, or loose connections. these shorts disrupt the flow of electricity, perhaps causing system malfunction or, in severe cases, fire. Identifying and addressing these issues promptly is paramount for safety and operational efficiency.

Did You Know? According to the electrical Safety Foundation International (ESFI), electrical fires cause billions of dollars in damage each year, emphasizing the importance of regular inspections and timely repairs.[ESFI Website]

DIY Repair: A Cautionary Approach

While the homeowner in question effectively resolved the issue through resoldering, it’s essential to acknowledge the inherent risks associated with DIY electrical work. Soldering requires a degree of skill and precision; improper technique can exacerbate the problem or introduce new hazards.

Pro Tip: Always disconnect the power supply before attempting any electrical repair.Use insulated tools and wear appropriate safety gear,including eye protection,to minimize the risk of electric shock.

Is Soldering Right for You?

For individuals lacking soldering experience,or those uncomfortable working with electrical components,professional assistance is strongly recommended. Licensed electricians possess the expertise and tools to diagnose and repair electrical faults safely and effectively. This ensures the work meets the required safety standards.

Repair Approach	Skill Level	Risk Level	Cost
DIY Resoldering	Intermediate to Advanced	Moderate to High	Low (cost of materials)
Professional electrician	N/A	Low	high (labor & parts)

The National Fire Protection Association (NFPA) reports that a important percentage of electrical fires are attributed to faulty wiring and improper repairs.[NFPA Website]

Preventative Measures for Electrical Safety

Regularly inspect electrical components for signs of damage, such as frayed wires, loose connections, and corrosion. Schedule professional electrical inspections, particularly for older systems, to identify and address potential hazards before they escalate. consider investing in surge protectors to safeguard sensitive electronics from power fluctuations.

Do you feel confident in your ability to safely assess and repair electrical issues?

How often do you have your home’s electrical system professionally inspected?

Understanding Basic Electrical Concepts

A short circuit happens when electricity takes an unintended path with low resistance. This causes a large current flow, potentially overheating wires and causing a fire. Understanding concepts like voltage, current, and resistance is crucial for grasping electrical safety principles. Proper grounding and circuit breakers are vital safety measures, interrupting the flow of electricity in case of a fault.

Frequently Asked Questions About Electrical Repairs

• What causes a gas component to short circuit? Short circuits can occur due to corrosion,damage to wiring,or loose connections within the gas system.
• Is it safe to repair electrical problems myself? DIY repairs can be risky, especially if you lack experience. professionals are recommended for complex issues.
• What should I do if I suspect an electrical short? Promptly disconnect the power supply and contact a qualified electrician.
• How often should I have my electrical system inspected? Experts recommend professional inspections every few years, especially for older homes.
• What is the role of soldering in electrical repairs? Soldering creates a secure electrical connection between components, but requires skill to execute safely.

Share this article with others to promote electrical safety! Leave a comment below to discuss your experiences with electrical repairs.

Have you tried using a different USB port, preferably a USB 2.0 port, to rule out USB-related signal errors?

Understanding teh Problem: Ghost Inputs & Pedal Conflicts

Many sim racers using the Logitech G923 racing wheel are reporting a frustrating issue: the brake pedal registers as pressed even when the gas pedal is being used. This “ghost input” or pedal conflict significantly impacts performance in racing simulations like iRacing, assetto corsa, rFactor 2, and F1 23.It’s a common complaint within the r/Simracing community and can ruin a race quickly. This isn’t typically a hardware fault, but a software or calibration problem. The issue can manifest differently – sometimes a constant brake signal, other times intermittent activation.

Common Causes of the G923 Brake/Gas Conflict

Several factors can contribute to this annoying problem. Identifying the root cause is the first step to a solution. Here’s a breakdown:

Software Conflicts: Background applications, particularly those dealing with input devices or game controllers, can interfere with the G923’s signal.

Driver Issues: Outdated, corrupted, or incompatible Logitech G923 drivers are a frequent culprit.

Calibration Errors: Incorrect calibration within the Logitech G HUB software or the racing simulation itself can lead to cross-pedal activation.

USB Port Problems: A faulty or overloaded USB port can cause intermittent signal errors.

Firmware Bugs: Though less common, firmware glitches within the G923 wheel itself can sometimes be responsible.

Power Supply Issues: Insufficient power delivery to the wheel can cause erratic behavior.

Troubleshooting Steps: A Step-by-Step Guide

Let’s dive into the fixes. Work through these steps systematically.

1. Restart Everything: The classic fix. Restart your PC, the G923 wheel, and the racing simulation. This clears temporary glitches.

1. Update Logitech G HUB: Ensure you’re running the latest version of Logitech G HUB software. Updates often include bug fixes and driver improvements. Download directly from the Logitech website.

1. Reinstall Logitech G923 Drivers:

Uninstall the G923 drivers through device Manager (search for “Device Manager” in Windows).

Disconnect the G923 wheel.

Restart your PC.

Reconnect the G923. Windows should automatically reinstall the drivers. If not,manually install them from the Logitech support site.

1. USB Port Swap: Try connecting the G923 to a different USB port, preferably a USB 2.0 port directly on your motherboard (avoid USB hubs). Test with a powered USB hub if direct connection isn’t possible.

1. Calibration in Logitech G HUB:

Open Logitech G HUB.

Select your G923 wheel.

Navigate to “Calibration.”

Run through the full calibration process, paying close attention to the pedal range settings. Ensure the brake and gas pedals are registering correctly without overlap. Reset to default if unsure.

1. In-Game Calibration: Many racing sims have their own calibration settings.

iRacing: Check the “Advanced Calibration” section in the iRacing settings.

Assetto Corsa: use the “Controller” settings and the “Force Feedback” options.

rFactor 2: Adjust the controller settings within the rFactor 2 interface.

F1 23: Navigate to Options > Controls > Wheel and Pedal calibration.

1. Disable Game-Specific Profiles in G HUB: Sometimes, G HUB profiles created for specific games can cause conflicts. Try disabling any game-specific profiles and using the default G923 profile.

1. Background Application Check: Close unneeded background applications, especially those that might be interfering with input devices (e.g.,controller mapping software,macro programs).

1. Firmware Update (If Available): Check Logitech’s support website for any available firmware updates for the G923. Follow the instructions carefully.

1. Windows Input Settings:

Search for “Joystick Settings” in Windows.

Select your G923 wheel.

Click “Properties.”

Go to the “Settings” tab.

* Ensure “Latest Driver” is selected.

advanced Troubleshooting & Community insights

Based on reports from the r/Simracing