Amazon has marked down the Creality K2 SE 4C to $359, offering a 23% savings on a compact CoreXY multicolor 3D printer that feeds four filaments into a single hotend at speeds up to 500 mm/s.
The machine uses an open four-spool rack mounted on the side of the frame to feed four distinct filaments into a single hotend. While it does not blend colors together, users can switch between all four loaded spools within a single print job. This setup occupies 37% less space than the larger K2 SE Combo.
XDA reported that the printer features a build volume of 220 by 215 by 245mm. Hardware specs include a dual-gear direct-drive extruder, an epoxy resin build plate, and a heated bed capable of reaching up to 100°C.
Creality rates the printer for a maximum speed of 500 mm/s and acceleration up to 20,000 mm/s². However, optimal surface quality requires dropping back to 300 mm/s, making the top rating a hard ceiling rather than a standard operational speed.
Layer heights range from 0.1 to 0.35mm using standard 1.75mm filament. Compatible materials listed by the manufacturer include PLA, PETG, and PLA-CF.
Smart leveling probes scan strictly within the active print area rather than the entire plate. Users manage jobs through a 3.97-inch color touchscreen backed by 2.4GHz Wi-Fi, USB file transfer, and 8GB of eMMC storage.
To reduce failed prints, the hardware includes Power Loss Recovery, run-out and tangle detection, Skip Partial Failure, and Auto Filament Relay. These automated systems target common user errors to simplify multi-color prototyping on a budget.