The Federal Aviation Administration exercised little oversight over the contractor work that triggered last Friday’s nationwide ground stop of flights across the United States, according to sources familiar with what happened in the room and to the union representing FAA technicians.
On the morning of November 13, an FAA technician accompanied a private contractor from L3Harris to a remote radiocommunications facility — which serves the air traffic control centers in southern Arkansas — to replace a decades-old router, according to CNN en Español. The technician considered that his role ended once the contractor entered the facility, and he turned to his own tasks without knowing exactly what the L3Harris engineer was doing, two sources and the union said.
Shortly after it was installed, the new router set off a cascade of communication problems that saturated the agency’s aging network, prompting the FAA to order the unusual full nationwide halt to departures. About 3,500 aircraft were in the air when departures were suspended for more than four hours while the agency worked to identify the problem.
FAA Administrator Bryan Bedford has defended the agency’s modernization process and insisted that the L3Harris engineer carrying out the upgrade “estaba supervisado por un técnico de la FAA” — was supervised by an FAA technician — and that a risk assessment had been done beforehand. Sources who spoke with CNN question that account.
The technician “solo estaba allí para abrir la puerta” — was only there to open the door — one said. “No hubo supervisión” — there was no supervision — another said. This hands-off arrangement is a recent innovation and a drastic change from how such maintenance work was managed under previous administrations, when the FAA exercised far stricter oversight of contractor work.
A March 2025 memo
According to CNN, the administration scaled back FAA oversight of this kind of work in an effort to speed up modernization of the national air traffic control system, using $12.5 billion from President Donald Trump’s “big and beautiful bill.” In a memo dated March 2025, the FAA laid out key changes to how maintenance and upgrades are carried out, stating: “Es fundamental aprobar sin demora el mantenimiento realizado por los proveedores de telecomunicaciones” — it is essential to approve without delay maintenance performed by telecommunications providers.
Under the policy change, the FAA went from receiving “solicitudes” — requests — from its private contractors to receiving “notificaciones” of planned work, indicating that “dichos trabajos se llevarán a cabo sin necesidad de aprobación de la FAA” — such work would be carried out without FAA approval, according to the memo.

The memo says an FAA liaison will assess the “propósito, la gravedad, el carácter crítico y el impacto” — the purpose, severity, criticality and impact — of the work. But sources told CNN that only a small number of liaisons exist nationwide to process thousands of notifications. “Entonces, ¿qué nivel de supervisión están ejerciendo realmente?” — so what level of oversight are they really exercising? — one of the sources said.
The L3Harris contractor arrived with only a few days' notice and completed the work without much agency oversight, according to sources and the union. The March 2025 memo “sentó las bases de lo que ocurrió el viernes pasado” — laid the groundwork for what happened last Friday — the source said.
Transportation Secretary Sean Duffy said Wednesday on the 2WAY streaming program “The Morning Meeting” that L3Harris did not identify and isolate the router problem quickly enough, which contributed to making it the longest ground stop since September 11, 2001, according to the Reading Eagle.
L3Harris has not commented on the ground stop since issuing a statement Saturday committing to support the FAA’s investigation, and the company declined to say more on Wednesday.
L3Harris, the contractor at the center of the episode, was formed on June 29, 2019, through the merger of L3 Technologies and Harris Corporation, a deal that made it the sixth-largest defense contractor in the United States.
The company traces its origins to the Harris Automatic Press Company, founded by Alfred S. Harris in Niles, Ohio, in 1895, which spent six decades making printing presses before merging in 1967 with Radiation, Inc. of Melbourne, Florida, a developer of antenna, integrated circuit and modem technology used in the space race.
L3 Technologies, the other half of the merger, was formed in 1997 to acquire business units from Lockheed Martin. The combined company is based in Melbourne, Florida.

The disruption could cost U.S. airlines more than $1 billion, with American Airlines facing estimated profit losses of between $136 and $354 million, according to figures from Raymond James reported by El Economista. Nearly 19,400 flights to or from the United States were canceled or did not operate between Friday and Monday morning, roughly 18% of scheduled flights.
What remains unanswered is exactly how the router was installed and who, if anyone, was supervising the work — the details now at the center of the dispute over what failed that day.