Geometric Future Unveils Model 3 Compact Case, Eskimo Plus 36 AIO, and Squama Fans

Designed for compact high-end builds, the 27-liter Model 3 accommodates massive graphics cards up to 435 mm while isolating the power supply in the front chamber.

Engineering High-End Hardware in a 27-Liter MicroATX Chassis

Building a high-performance system without massive spatial footprints usually involves heavy compromises. According to hardware disclosures, the Geometric Future Model 3 addresses this by restructuring internal volume inside a 27-liter microATX enclosure. By relocating the power supply unit to an isolated front compartment, the layout opens up the primary thermal chamber for larger components.

Despite the compact exterior, the chassis clearance metrics are substantial. It accepts graphics cards up to 435 mm in length and includes an integrated anti-sag bracket to protect PCIe slots from heavy modern GPUs. For thermal management, the chassis supports up to eight 120 mm fans alongside a 360 mm radiator mounted at the top.

Aesthetically, the layout features dual tempered glass panels and a removable internal platform designed to anchor decorative accessories while assisting with internal airflow paths. Buyers can purchase the enclosure completely bare or bundled with five pre-installed Squama 3003-12 ARGB PWM fans. The colorway options span four distinct finishes: black and yellow, black and grey, black and green, and full white.

Upgraded AIO Cooling and Thick Static Pressure Fans

Complementing the chassis are two cooling releases engineered for dense thermal loads. The Eskimo Plus 36 builds directly upon the architecture of the older Eskimo Pro 36 water cooler. The primary upgrade involves factory-installed Eskimo 3003 ARGB fans. The pump delivers a flow rate of 1.5 liters per minute, pumping fluid across a copper base measuring 55.8 by 55.8 mm. This wide-format cold plate maximizes surface contact area against the integrated heat spreader (IHS) of modern processors.

The pump block features a diffused ARGB lighting profile, prioritizing subtle glow patterns over direct, glaring LEDs. Official specifications note broad compatibility with current Intel and AMD sockets, though full socket matrix details vary by regional release.

Working alongside the AIO, the Squama 3003-12 fan steps away from standard dimensional constraints. While standard cooling fans measure 25 mm in thickness, this 120 mm unit expands to 30 mm. That extra depth allows for a nine-blade impeller built specifically to drive high static pressure. The operational envelope spans a PWM range from 800 to 2300 RPM, outputting an air volume of 84 CFM against a static pressure rating of 2.93 mmH₂O.

Geometric Future integrated a patented dragon-scale frame texture designed to smooth out boundary layer turbulence and minimize aerodynamic noise. Edge-lit ARGB strips run along both sides of the frame for motherboard synchronization. Furthermore, the company offers both standard and reverse-blade variants to preserve visual continuity in dual-glass showcase builds where intake fans would otherwise display their structural bracing.

The 30-Second Verdict for Compact System Builders

• Chassis Footprint: 27-liter microATX design with front-mounted PSU isolation.
• Component Clearance: Supports GPUs up to 435 mm with an included anti-sag bracket.
• Cooling Capacity: Accommodates up to eight 120 mm fans and a top 360 mm radiator.
• Fan Architecture: 30 mm thickness profile yielding 84 CFM and 2.93 mmH₂O static pressure.

This coordinated hardware drop targets builders who want to assemble dense, heavily cooled microATX rigs without stepping up to a mid-tower or full-tower footprint. By matching a high-clearance compact chassis with thick static-pressure fans and a wide-base 360 mm AIO, the ecosystem provides a coherent foundation for hardware enthusiasts balancing raw thermal performance with tempered glass aesthetics.