For users who are experiencing issues with Apple Watch charging but not charging, the cause may be a damaged charger or an unresponsive Apple Watch screen. The team has 5 steps to fix Apple Watch not charging or not charging. Let’s recommend to see.
5 Steps to Fix Apple Watch Not Charging or Not Charging
1. Check Apple Watch Temperature
First, let’s check the temperature of the Apple Watch whether it’s too hot or too cold. The temperature at which Apple Watch works best is 0° to 35° C, and Apple Watch should be stored in an ambient temperature between -20° and 45° C.
If the device is hot It is recommended to leave the device to cool down. If it’s too cold, let it warm up first. then bring it back to charge
2. Check the cleanliness of the charging part.
Turn over the back of the Apple Watch case to see if any dirt is stuck. If you wear your Apple Watch for a long time without cleaning it, the back cover of your Apple Watch may get sweaty or dirty. It is recommended to bring a clean cloth dampened with water to wipe it clean.
Including the magnetic charging dock must be clean as well. If the charger is dirty Then use a clean cloth to wipe clean properly.
3. Try charging your Apple Watch for 30 minutes.
Try placing your Apple Watch on the charger for at least 30 minutes. Before charging, check the adapter you are using to see if it works properly. no damage
If your Apple Watch battery is very low or low When we charge the Apple Watch, the screen shows a red lightning symbol. and will turn green when the battery level increases while charging.
4. Change another charging cable. Let’s try to recharge.
If you try to charge it and it still won’t charge your Apple Watch, it could be because the charging cable and dock you’re using are damaged. It is recommended that you try using a new Apple Watch charging cable. The charging cable must be a genuine Apple charger.
5. Force Restart Apple Watch
Sometimes the problem can be caused by a software bug. We can force restart the device (Hard Reset) by pressing and holding the Side button and Digital Crown button at the same time for at least 10 seconds. When you see the Apple logo displayed on the Apple Watch screen, release both buttons.
After we tried all the steps, Apple Watch still won’t charge or no force restart response. We recommend that you contact Apple Support through the Apple Support app, or take the device to an Apple Store or Apple Authorized Service Provider such as iCare so they can make sure the problem is caused by the Apple Support app. our machine or not
source 9to5mac