Marking fifty years since its debut, the Audi 100 C2 engineered by Ferdinand Piëch combines a rigid aerodynamic architecture with an innovative inline-five cylinder layout to redefine upper mid-range positioning against competitors like Mercedes-Benz.
Audi Produced 896,399 C2 Series Units
- Audi produced exactly 896,399 units of the C2 series before the lineup transitioned to the C3 in 1982.
- The vehicle achieved a drag coefficient of 0.36 while shedding roughly 200 kilograms compared to rival configurations.
- Current estimates place the surviving vehicle stock in Germany between 1,000 and 1,500 units.
Shaping the Typ 43 Architecture
When the second generation Audi 100 rolled before the specialized press in Luxemburg in August 1976, it departed from the conservative reputation of its predecessor. Ferdinand Piëch, serving as technical board member in Ingolstadt, deployed the Typ 43 architecture to contest the upper middle class against established rivals. Hartmut Warkuß handled exterior styling, designing a monolithic profile characterized by straight lines and sharp edges.
The design incorporated glued front and rear windshields to increase structural rigidity alongside a tapered front end designed to accommodate a longer powerplant. These modifications helped yield a drag coefficient of 0.36 alongside a lean empty weight dipping well below 1.2 tons. Audi summarized the engineering direction in its March 1977 sales brochure, calling the vehicle “Unser schönstes Stück Technik” and describing it as a touring sedan setting new standards.
Engineering the Five-Cylinder Powerplant
Initial production models relied on traditional four-cylinder configurations producing between 85 and 115 horsepower. Because a six-cylinder unit proved too long and front-heavy for front-wheel drive applications, engineering teams selected an inline-five design to meet premium acoustic expectations. The EA828 engine shared core structural dimensions with the EA827 four-cylinder block, utilizing an 88-millimeter cylinder spacing while extending the stroke to 86.4 millimeters.
Series production of these powerplants commenced at the Volkswagen plant in Salzgitter, with customer deliveries of the 2.1-liter 5E variant beginning in April 1977. The mechanical layout generated a distinct acoustic signature through a 1-2-4-5-3 firing order and a 144-degree crank angle spacing. Later additions included a 70-horsepower naturally aspirated diesel variant in 1978 and the high-performance 200 5T turbo model generating 170 horsepower.
| Model Variant | Engine Type | Output | Production Era |
|---|---|---|---|
| Audi 100 1.6 / 2.0 | Four-Cylinder | 85 – 115 PS | 1976 – 1982 |
| Audi 100 5E | Inline-Five (Injection) | 115 PS | 1977 – 1982 |
| Audi 100 5D | Inline-Five (Diesel) | 70 PS | 1978 – 1982 |
| Audi 200 5T | Inline-Five (Turbo) | 170 PS | 1979 – 1982 |
Claus Luthe Designed the Interior with Continuous Ventilation Slots
Inside the cabin, designer Claus Luthe collaborated with Munich architect Paolo Nestler to establish an environment featuring natural tones across fabrics, door panels, and carpets. The dashboard featured continuous ventilation slots across the cabin width to eliminate drafts, a design principle later adapted for subsequent production lines. Operating the vehicle involved pairing the 5E motor with a three-speed automatic transmission yielding a zero to 100 km/h acceleration time of 11.4 seconds.
Pricing for the top-tier Audi 100 5E CD reached 20,515 Deutsche Mark in 1978, placing it on par with competing offerings from Stuttgart despite trailing in brand prestige. Body style variants expanded beyond the primary four-door sedan to include a rare two-door configuration accounting for under two percent of output and the liftback Avant introduced in September 1977.