Developer Aaron Christophel ran the 1993 shooter Doom on the display controller of a $48 MOVESPEED MSSU10 flash drive, steering the marine by copying and reading files on the stick.
The drive’s 428-by-142-pixel color screen is normally driven by a C*Core CCM4101 microcontroller with an Arm Cortex-M4F core, 128 KB of SRAM and 2 MB of SPI NOR flash, according to Purepc. Christophel, who publishes as atc1441, accessed the chip’s Serial Wire Debug port, dumped the factory firmware and found the part running at 40.2 MHz instead of the 200 MHz cited in its datasheet, PurePC reported.
Christophel built on DMC100-DOOM, a port Polish engineer Artur Bieniek wrote for the FNIRSI DMC100 multimeter with only 32 KB of RAM. That version renders in horizontal strips instead of a full framebuffer, a technique that let the flash-drive screen push roughly 13 frames per second while the game logic still ticks at the original 35 Hz. Input latency sits around 100 ms.

The CCM4101 has no direct USB link; it polls the Silicon Motion SM2320G storage controller over I²C every 50 ms to read transfer counters. Christophel wrote a Python script, doomctl.py, that maps keystrokes to short, patterned read and write bursts.
A file write means “move forward,” a read means “turn right,” and simultaneous read-plus-write triggers “fire.” Ordinary drag-and-drop copies in the host OS therefore nudge the player character across E1M1.
Teardown photos show the SM2320G — also found in Kingston XS2000 and Lexar SL660 Blaze portable SSDs — paired with SanDisk NAND. The CCM4101’s laser-erased markings forced Christophel to rely on the SWD port for identification. Silicon Motion’s public datasheet for the SM2320G lists USB 3.2 Gen 2×2 support, matching the drive’s advertised 1,090 MB/s peak throughput, ITHardware noted.
| Component | Spec claimed | Measured / observed |
|---|---|---|
| CCM4101 core clock | 200 MHz | 40.2 MHz |
| SRAM | 128 KB | 128 KB |
| SPI NOR flash | 2 MB | 2 MB |
| Display resolution | 428 × 142 px | 428 × 142 px |
| Doom frame rate | — | ~13 fps |
| Game logic tick | 35 Hz | 35 Hz |
Bieniek’s DMC100-DOOM repository on GitHub provided the strip-rendering engine and the memory layout that fit the CCM4101’s 2 MB flash. Only the first episode map, E1M1, fits; sound is omitted entirely. Christophel credited the Polish developer in his YouTube walkthrough and said the port “would not exist without Artur’s groundwork.”
“The strip renderer is the only way to squeeze a framebuffer into 128 KB of SRAM,” Christophel told PurePC.
Neither PurePC nor ITHardware could determine whether the 40.2 MHz ceiling stems from a deliberate vendor under-clock, a misconfigured PLL in the dumped firmware, or a silicon revision that never hit the datasheet target. The CCM4101’s product brief from China Core lists access-control and fingerprint-reader applications — functions the flash drive does not expose — suggesting the chip may be repurposed inventory.
Christophel has published the firmware dump, the modified DMC100-DOOM source and the doomctl.py control script on his GitHub under the atc1441 account. The drive retails for about 50 euros in Europe and 175 zloty in Poland.