EOS hopes to combine nLight beam shaping expertise into AM methods

2024-06-17 07:49:57

EOS Strategic partnership with nLight. The American has expertise that may dynamically change the form of laser beams.

As well as, the AM Group is launching a brand new model of its M-290 3D metallic printer, the M 290-2 400W AM system. It’s geared up with two 400W lasers with utterly overlapping ranges. The M 290 sequence now consists of three methods.

nLight is a US firm that may change the form of the laser beam utilizing programmable AFX lasers. This impacts effectivity and is already utilized in flatbed laser cutters, amongst different issues.

EOS CEO Marie Langer and nLight CEO Scott Keeney.

3 times extra productiveness

EOS and nLight will now examine how this expertise might be carried out into the German family-owned firm’s additive manufacturing methods. Customers can then program the spot measurement through the EOS software program, relying on whether or not they wish to print a big mass or superb element on a workpiece. nLight’s AFX lasers supply seven totally different beam profiles, starting from an 85 micron spot measurement to a 210 micron ring. The AFX laser can print as much as 3 times sooner on 316L metal and aluminium in comparison with an ordinary 400W course of. Scott Kinnette, CEO Enright“The nLIGHT and EOS groups and applied sciences are extremely complementary; we’re excited to construct on the early success of AMCM and combine our laser expertise into the broader EOS product portfolio.” The 2 firms anticipate the expertise to be out there within the first machines by the tip of 2024.

New mannequin M 290 with two 400W lasers

New variants within the M 290 sequence
One doesn’t have to attend that lengthy to see the third model of the EOS M 290, a well-liked machine from the German family-owned firm. Because the first model was launched twenty years in the past, virtually 2,000 have been put in. “This speaks volumes concerning the system’s recognition and makes this sequence of additive manufacturing methods most likely some of the well-liked worldwide,” says Monica Smith, Product Line Supervisor Steel at EOS.

Based mostly on a confirmed idea

Related Articles:  Energy voucher: Engie announces a significant discount for these customers with a special profile!

The third variant of the M 290 depends on the confirmed idea in lots of respects. For instance, the construct quantity stays the identical (250 x 250 x 325 mm), the main target and beam high quality are the identical, and the method high quality and materials library are akin to the single-laser model. The 2 lasers might be totally overlapped, which will increase the productiveness of the system.

Appropriate for serial manufacturing

The system was developed by AMCM and its affiliated teams EOS Issues He’s normally answerable for the event of particular machines for additive manufacturing. The second laser will increase the productiveness of the metallic printer. EOS is due to this fact focusing totally on sequence manufacturing functions for the brand new machines. For this goal, Sensible Fusion and OT methods from EOS are built-in.

1718970042
#EOS #hopes #combine #nLight #beam #shaping #expertise #methods

Leave a Comment

This site uses Akismet to reduce spam. Learn how your comment data is processed.