Mock-up units of the upcoming iPhone Air 2 have surfaced online, revealing significant design and hardware updates including a dual-camera system featuring a 48-megapixel ultra-wide sensor.
The unreleased device, alongside the iPhone 18, is anticipated to launch in the spring of 2027, according to reports. As the release window approaches, model units have begun appearing publicly. Leaker Sonny Dickson posted photographs of the mock-ups on the social media platform X.
While the iPhone 18 is expected to maintain a design largely consistent with the previous generation, the iPhone Air 2 introduces more noticeable modifications. The rear camera configuration transitions from a single lens to a dual-lens setup. The two lenses are arranged horizontally on the left side of the camera module, with the microphone and flash positioned on the right, maintaining the horizontal orientation established by the original model.
For photography, the device is projected to utilize a dual 48-megapixel configuration, combining a main camera with a 48-megapixel ultra-wide lens. This addition aims to expand shooting perspectives and address the limitations of the single-lens predecessor.
Additional projected improvements span the physical build and internal power specifications. The thickness of the chassis is expected to decrease from 5.6 millimeters down to 5.2 millimeters, shedding approximately 0.4 millimeters. Despite the thinner profile, the battery capacity is projected to increase to roughly 3,500 milliamp-hours, up from 3,149 milliamp-hours in the first-generation device.
Taiwan Semiconductor Manufacturing Company pioneered the dedicated foundry model when it was established in 1987, becoming the first company to manufacture chips exclusively for other designers rather than its own products.
It was the first foundry to bring 7-nanometre and 5-nanometre processes into volume production and the first to commercialise ASML’s extreme ultraviolet lithography technology at scale. The company now commands roughly 70% of the global foundry market and serves as the primary contract manufacturer for Apple’s custom silicon.
Under the hood, the device is slated to run on Apple’s A20 Pro processor, built using Taiwan Semiconductor Manufacturing Company’s 2-nanometer manufacturing process. It is also expected to include 12 gigabytes of memory and an upgraded proprietary C2 baseband modem from Apple. The display will reportedly remain a 6.5-inch ProMotion high-refresh-rate organic light-emitting diode screen featuring a reduced Dynamic Island area.