Swedish utility Vattenfall turned a decommissioned wind-turbine nacelle into a fully equipped tiny house, proving that the steel shells protecting generators at 100 meters can outlive their power-producing duty by decades, La Nación reported.
The gondola from a V80 2-megawatt turbine installed in 2005 at the Gols wind farm in Austria generated roughly 73 gigawatt-hours over nearly 20 years — equivalent to the annual consumption of more than 29,000 households — before Dutch firm Business in Wind released the 10-by-4-by-3-meter structure for reuse in October 2024, according to Lanacion.
Design studio Superuse, with Blade-Made and builder Woodwave, fitted a kitchen, bathroom, living area, heat pump, solar water heater and rooftop PV panels inside the original shell, which was exhibited at Dutch Design Week in Eindhoven that same month, according to Clarin. The initiative, presented in October 2024 and shared via the YouTube channel Cool Ideas, forms part of a series of proposals aimed at reducing waste from the wind industry.
Vattenfall Pilots Demonstrate Blade-Waste Portfolio Approach
- Vattenfall’s parallel pilots — 15 pairs of skis made from blade carbon fiber and 57 blades covering a Lund, Sweden parking garage — show a portfolio approach to the 43-million-tonne blade-waste forecast for 2050.
- No regulatory framework yet classifies turbine structures as “buildings,” leaving permitting, insurance and resale value unresolved for commercial rollout.
From Austrian Ridge to Eindhoven Showcase
The V80 nacelle spent its working life at 100 meters above the Burgenland plain. After decommissioning, Business in Wind transported the 15-tonne shell to the Netherlands where Feenstra, a Vattenfall subsidiary, handled electrical integration.
“If a structure as complex as a house is possible, many simpler solutions are also viable and scalable,” Jos de Krieger, partner at Superuse and Blade-Made, told La Nación during the Dutch Design Week opening. The Dutch Design Week in Eindhoven ran from 19 to 27 October 2024, where visitors could tour the interior and see the adaptations made to the former machinery.

Waste Stream Economics
Current recycling routes shred blades for cement-kiln fuel, recovering only marginal energy value. The project seeks to demonstrate that some turbine components can be reused once they stop producing electricity.
In another project, Vattenfall commissioned the manufacture of 15 pairs of skis using carbon fiber recovered from wind-turbine blades. The pieces came from the Dutch Irene Vorrink wind farm and were processed by the Norwegian company Gjenkraft. Afterwards, the manufacturer EVI Ski incorporated the recovered fibers to reinforce the wooden cores of the skis.
“We want to use these long fibers from the blades to create another long thing, like skis,” explained Endre Hals, founder of EVI Ski. The company also donated 57 blades from a Danish wind farm to build part of the façade of the Niels Bohr parking garage in Lund, Sweden. The building, inaugurated in 2025, has 365 spaces across five levels.
Regulatory Gap Remains
No EU member state has amended building codes to recognize turbine components as certified structural elements. Vattenfall has not disclosed project capex or a timeline for a second housing unit, leaving unit economics opaque.
Superuse was founded in 1997 as 2012Architecten by Jan Jongert and Césare Peeren in Rotterdam, adopting its current name in 2012 to reflect a strategy of designing from available waste streams rather than virgin materials. The studio operates from BlueCity on the Maas River bank and has spun off Superuse on Site and Superuse China, while developing open-source platforms such as Harvestmap and cyclifier.org to map reusable material flows.
The next milestone is the European Commission’s revision of the Construction Products Regulation, expected in 2026, which may create a “circular construction” product category. Until then, each nacelle house remains a bespoke pilot rather than a scalable product line.