MakeUseOf: 5 TV Settings to Fix Before Playing GTA VI

MakeUseOf's gaming team says modern TVs ship with only one or two HDMI 2.1 ports needed for 4K120 output on PS5 or Xbox.

GTA VI lands in a living room already preloaded, console ready — and, if MakeUseOf’s gaming team is right, hampered by a television that was never told what to do.

Five settings separate the game Rockstar built from the dimmed, blurred, laggy version an unremarkable panel will deliver.

None of it requires new gear. All of it requires menu-diving.

The wrong HDMI port

The first item is also the least obvious. Modern TVs ship with several HDMI ports, but usually only one or two carry the full HDMI 2.1 spec — what a PS5 or Xbox actually needs for 4K120 output. HDMI 2.1 nearly triples bandwidth, 48Gbps against 18Gbps on 2.0, raises the ceiling from 60Hz to 120Hz, adds variable refresh rate (VRR), and enables eARC for uncompressed audio.

“Most TVs have multiple HDMI ports, but not all of them are HDMI 2.1, which is what your PS5 or Xbox actually needs,” MakeUseOf reported.

Wrong port, and the console negotiates down to 4K60 with no VRR at all. MakeUseOf’s Pankil Shah suggests looking for a port labeled 4K/120 or eARC and plugging the console in there. The fix is free; the mistake is common.

VRR fixes screen tearing

VRR syncs the TV’s refresh rate to whatever the console outputs in real time, smoothing frame pacing and eliminating screen tearing. It lives under Display, HDMI, or Game settings depending on the brand — and only works over an HDMI 2.1-class connection.

GTA VI is capped at 30FPS on consoles, per MakeUseOf’s reporting. Some of this feels paradoxical — 120Hz bandwidth for a 30-frame game — but the headroom is what lets the panel sync cleanly instead of interpolating. And it matters for every other game in the library.

Game Mode strips away the lag

Out of the box, TVs ship in Standard, Vivid, Sports, or Movie modes, all applying edge sharpening, noise reduction, and contrast enhancement before a frame reaches your eyes. Every pass adds milliseconds. Game Mode disables that pipeline outright; MakeUseOf notes it may be labeled Game Optimizer on some sets.

Game Mode usually kills motion smoothing too, but not always. Samsung calls it Auto Motion Plus, LG TruMotion, and Sony MotionFlow. The trick — generating synthetic frames between real ones to fake higher framerates — adds input lag and looks visibly wrong on a 30FPS game. Double-check it under Display or Picture settings.

Eco-mode dims Vice City

Power-saving modes throttle backlight brightness and processing to shave kilowatt-hours, and they’re often on by default. The cost is a washed-out image in exactly the scenes GTA VI is built around: night missions and neon-lit streets. MakeUseOf is blunt — the energy savings are small, the image cost is large. Eco and Energy Dashboard settings live under General or System.

Leave HDR to the console

Dynamic tone mapping adjusts brightness and contrast scene by scene — genuinely useful for film, counterproductive for games, where the console is already doing that work and a second pass can degrade the image.

The more useful setting is HGiG, the HDR Gaming Interest Group guideline set built by console makers, TV manufacturers, and game developers together. It maps HDR to your panel’s measured capabilities. Tone mapping off, then; HGiG on if your set offers it.

For context: HDMI 2.1 is a huge upgrade over HDMI 2.0, yet not all of a TV’s ports offer it, with the 4K/120 or eARC labeling often in small text near the input itself.

The 30-second checklist

Console into the 4K/120 port. VRR on. Game Mode on. Motion smoothing off. Eco mode off. Dynamic tone mapping off, HGiG on. Several menu settings need adjusting, per MakeUseOf’s walkthrough, before Vice City loads.

Photo of author

Technology Desk

Technology Desk at Archyde.

Chelsea Women 1-0 PSG: Buurman Late Winner Lifts Blues Top of UWCL Table