2023-06-03 22:07:50
As you remember, the useful life of mobile batteries is measured by charge cycle, what does this mean? It is an indicator so that you know approximately how long the battery of your cell phone with operating system could last Android. You consume a charge cycle when the sum of all charges equals 100%.
Look at the following example to understand the issue: suppose your mobile device is at 0% and you charge it up to 80%, then you use it and it stays at 0% again, but on the second charge you disconnect it when it reaches 20% , the sum of both values gives a total of 100%, it means that you have just exhausted a charge cycle.
Modern smartphones with batteries of 5 thousand milliamps (mAh) or higher values, support between 300 and 500 charging cycles, in simple words you can only charge it from 0% to 100% about 300 or 500 times, then they stop working. Next, from Depor we will show you the 10 recommendations that you should and should not do to prolong the life of your battery and save up to 40% of energy.
The 10 actions you should and should not do to extend the life of your battery
- Use vibration only for calls or alarms, not for notifications.
- Activate battery saving mode when you have 30% or 20% power left.
- Close the background applications that you do not use, as they continue to consume some of your smartphone’s resources.
- Disable “Always on Display” mode to save more battery.
- Do not expose your phone to very high temperatures.
- Browse with dark mode enabled.
- Turn on the automatic brightness function, so your cell phone will raise or lower the brightness when necessary.
- Stop using “fast charge” on a daily basis, many charge the device to 100% in a few minutes, drain the power and charge it back to 100%, this way you will quickly consume the charge cycles.
- Use original chargers and not replicas.
- Do not charge equipment in vehicles or computers.
Know the solution when the touch screen of your Android mobile does not work
- restart the cell phone: surely there is a process that is freezing the touch screen of the device, so when you restart your cell phone all the processes will also be canceled and the RAM memory returns to 0 GB of use. How do you restart your phone if the touch doesn’t work? Simple, simultaneously press the physical power buttons, volume minus and plus for about 5 or 10 seconds, when it restarts, release them because otherwise you will access the “Root” mode. If you’re prompted for a security pattern before shutting down or rebooting, there’s no choice but to wait for the battery to die.
- Access safe mode: just like computers or laptops, cell phones and tablets can also be infected by any type of virus. This would cause your device to have bugs like frozen screen. We recommend you access “safe mode”, a tool that after enabling it, your smartphone will automatically restart to show you only the pre-installed applications of Androidif the touch screen works without problems, it is probably a virus.
- The touch does not work, how do I enter safe mode? It’s a good question, but it has a solution. Restart your cell phone several times with the method that we mentioned at the beginning, so you will force the system to access the aforementioned mode.
- other solutions: clean the touch screen with a flannel, dirt prevents the cell phone from recognizing your gestures; remove the screen protector or change it, sometimes this device cracks or wears out and prevents you from browsing normally; reset the cell phone, it is worth mentioning that after doing so you will lose all your data, be they photos, videos, documents, etc.; take it to a technical service.
1685835843
#Android #actions #care #save #phones #battery #Functions #Tools #Fast #charge #Recommendations #Charge #cycle #DEPORPLAY